Configuring Samsung SSP device for Display
Prerequisites
Configured Display site - hosted or on premise
Samsung DB10E-T device (with factory presets)
Please note - the Samsung DB10E-T device is only supported in landscape orientation!
Configuration
Power up the Samsung device - and follow the steps below that match the steps in the configuration guide online.
"1. Menu Language"
Choose English"2. Display Orientation"
Choose Landscape"3. Auto power off"
Choose "Off""4. Network Settings"
Connect to a network"5. Clock Set"
Set current date and time"6. Play via"
Choose "URL Launcher""7. Device name"
Give the device an unique name"8. Setup Complete"
Click OKIn "Change URL", enter URL to the Display list, e.g. https://customername.rdisplay.com/Display.mvc/Show/[Display ID] (cloud customers) or https://servername.display.com/Display.mvc/Show/[Display ID] (on-premise customers), and choose Done
[Display ID]'s can be found by opening https://customername.display.com/Display.mvc on a PC
Click "Show" for a Display
In the URL for the Display, locate the ID at the end of the URL
Choose "URL Launcher"
From the overview in Pronestor Display choose display
We do recommend that the built-in “On/Off Timer” is configured for optimization of electricity consumption. See below for instructions.
On/Off timer configuration
PLEASE REFER TO YOUR SAMSUNG SSP DEVICE SUPPLIER FOR SPECIFIC ON/OFF TIMER REQUIREMENTS.
Using the Samsung SSP remote control, go to "Home"
Go to "On/Off Timer"
In the "On Timer" configuration section, set the time at which you want the device to turn on
In the "Off Timer" configuration section, set the time at which you want the device to turn off
Additionally, you can add holidays from the section, "Holiday Management"
Example:
Work hours in the organization span from 7:00 AM to 6:00 PM. Therefore there is no need for the displays to be on from 6:00 PM to 7:00 AM.
Go to "On/Off Timer"
In the "On Timer" configuration section, set the time to 7:00 AM
In the "Off Timer" configuration section, set the time to 6:00 PM
Parsing SecurityToken to a display
We do recommend using SecurityToken, to ensure and protect a display.
If a SecurityToken has been set in the administration module, you need to parse this via a parameter. Here's how you do that:
Note - if you have used another URL or have just added the securitytoken - please reset the device as described below.
Important for troubleshooting
Opening menu via Remote control:
To get into the menu of the SSSP device - click the "Home" button on the remote control
Hit key "1" on the remote to return to the list of Displays in Pronestor Display
Resetting device
To reset to factory settings - turn off the device - hit "mute 182" on the remote and power on the device
If a device is to point to another site - please hit the Change URL field, and type $DEL + Done, before a new site can be configured in the URL Launcher
"Network connection lost"
It will say this because the URL used in the URL Launcher is incorrect - please ensure that it conforms to a complete URL with http/https
The DB10E-TPOE with firmware 1011 does not support using of port in the URL